Home/Coal Mining Legislation/Coal Mining Legislation – 1 Coal Mining Legislation Coal Mining Legislation – 1 Admin07/08/20240 17 Less than a minute Report a question What's wrong with this question? You cannot submit an empty report. Please add some details. 0% Coal Mining Legislation Coal Mining Legislation - 1 1 / 40 1. The protective footwear shall be supplied free of charge, at intervals not exceeding------- Six months Seven months Four months Five months Coal Mining Legislation 2 / 40 2. The air pressure that a compressor gauge shows indicates The pressure that is in short of atmospheric pressure, The pressure that compressor is delivering, The pressure that the air is being discharged, The pressure in excess of the atmospheric pressure Coal Mining Legislation 3 / 40 3. An official of a mine shall be literate and Well conversant with English and Hindi, Well conversant with all official correspondence, Well conversant with local customs, Well conversant with the language of the district in which the mine is situated or with the language understood by a majority of the persons employed in the mine Coal Mining Legislation 4 / 40 4. When Calcium carbide is to be used underground the maximum weight that can be taken below ground for usage is not more than --------. three kilogram two kilogram one kilogram half a kilogram Coal Mining Legislation 5 / 40 5. The manger shall fix, from time to time, the maximum number of shots that a shot-firer may fire in any one shift and shall not in any case exceed the number of shots that that a shotfirer can fire in a gassy seam of second or third degree or a fiery seam is Fifty if a single shot exploder is used and sixty, if a multi-shot exploder is used; Eighty if a single shot exploder is used and seventy if a multi-shot exploder is used; Forty if a single shot exploder is used and eighty if a multi-shot exploder is used; None of the above Coal Mining Legislation 6 / 40 6. In the case of a misfire which of the following statements is not correct, In the event of a misfire, a second charge shall be placed in the same hole and relieved. In the event of a misfire a second charge shall not be placed in the same hole The area of misfire has to be marked with a red flag, The misfire has to be dealt as far as possible by the same blaster Coal Mining Legislation 7 / 40 7. When two working places belowground have approached within___distance to each other all persons have to be withdrawn from both working places before blasting four meters three meters six meters five meters Coal Mining Legislation 8 / 40 8. In a non-gassy seam the number of shots with single shot exploder and multi shot exploder is respectively 40, 50 20, 40, 50, 60, 50, 100 Coal Mining Legislation 9 / 40 9. If an appeal is to be made to Chief Inspector against an order made by the Regional Inspector, it should be submitted within ___ days along with the order received by the appellant. 15 days 25 days 35 days 20 days Coal Mining Legislation 10 / 40 10. Before an air compressor is put to use it should be subjected to a hydraulic test at a pressure of ___ times the working pressure One-and-a-halftimes Two-and-a-halftimes. Three times Equal to working pressure Coal Mining Legislation 11 / 40 11. Except in a stone drift or a sinking shaft, not more than__ holes shall be fired in any one round if initiation is non-electrical and not more than____ if initiation is done electrically. 06 & 10 10 & 6 12 & 24 10 & 10 Coal Mining Legislation 12 / 40 12. While using permitted explosives, the drill-hole depth in relation to undercut, overcut or side cut shall be --- Shall be exactly equal to the depth of the cut, Shall be at least 15 cm more than the cut Shall be at least 15 cm lesser than the cut Shall depend on the pattern of drill holes Coal Mining Legislation 13 / 40 13. The cable used for blasting shall have a length of minimum 10 meters 15 meters 25 meters 20 meters Coal Mining Legislation 14 / 40 14. Drill hole diameter shall be such that there will be a clearance of ___ cm between the explosive cartridge and wall. 0.5 centimeter 0.3 centimeter 0.7 centimeter 0.2 centimeter Coal Mining Legislation 15 / 40 15. The number of shots that are fired in opencast mines is 60, if a single shot exploder is used and 120, if a multi-shot exploder is used: 50, if a single shot exploder is used and 100, if a multi-shot exploder is used: 40, if a single shot exploder is used and 80, if a multi-shot exploder is used: 30, if a single shot exploder is used and 60, if a multi-shot exploder is used: Coal Mining Legislation 16 / 40 16. The aggregate maximum charge in all the holes fired at one time shall not exceed------. two kilograms three kilograms four kilograms six kilograms Coal Mining Legislation 17 / 40 17. In a stone drift after shots have been fired, all loose rock within ___ meters from face shall be removed from the face, cleaned or washed with water and examined for the presence of misfires or sockets. 1.5 2 1.2 1.02 Coal Mining Legislation 18 / 40 18. When the shots are fired in non-electrically, the time after which the blasting area can be entered is. 25 minutes 20 minutes 15 minutes 30 minutes Coal Mining Legislation 19 / 40 19. Every fence on the surface shall be inspected once in Seven days Ten days Fifteen days One month Coal Mining Legislation 20 / 40 20. If an appeal is to be made by any appellant to the committee it shall be done within __ days of the receipt of the order by the appellant 10 days 20 days 15 days One month Coal Mining Legislation 21 / 40 21. A copy of the manpower plan has to be available with The attendance clerk, All the foremen and supervisors of the mine, The Welfare officer of the mine, The safety officer. Coal Mining Legislation 22 / 40 22. Every blasting apparatus shall be cleaned and overhauled by a competent person once in. 3 months 4 months 5 months 6 months Coal Mining Legislation 23 / 40 23. The manager shall submit a copy of emergency plan to the regional inspector, within ___ days of opening or re-opening of the mine. 15 days 25 days 20 days 30 days Coal Mining Legislation 24 / 40 24. If the explosive is Non-Permitted Explosive it can be used in Stone drift not containing coal dust Any stone drift whether it contains coal dust or not In watery strata In a non-gassy coal mines Coal Mining Legislation 25 / 40 25. A manpower distribution plan has to be prepared in every mine during Second week of the every month, First week of every month, During December last week once in a year, Once in six months Coal Mining Legislation 26 / 40 26. If the shots are fired electrically, the time after which the persons can enter the blasting area is. Four minutes Six minutes Three minutes Five minutes Coal Mining Legislation 27 / 40 27. While blasting in gassy mines the following shall not be done Delay-action detonator shall be used when number of holes is more, Delay element shall be of approved type, Delay elements shall be used only in the case of burn-cut, Delay element shall not be used without prior permission. Coal Mining Legislation 28 / 40 28. The periodicity of conducting hydraulic test is once in ___ Five years. Three years. Two years. One year. Coal Mining Legislation 29 / 40 29. Before charging shot-holes, and before firing test for inflammable gas has to be tested for in and around a radius of ___ meters of the place of firing. 25 meters 15 meters 18 meters 14 meters Coal Mining Legislation 30 / 40 30. No blasting shall be if the shortest distance from the place of firing to any part of such building or structure is less than --------irrespective of the amount of the charge. 150 meters 100 meters 50 meters 25 meters Coal Mining Legislation 31 / 40 31. The competent persons meant for inspection of all machinery and plant shall inspect once in ___ six days nine days seven days eight days Coal Mining Legislation 32 / 40 32. When any repair or modification is done on a compressor the following action is to be taken Conduct hydraulic test at the completion of the previous 3 years period on which earlier commissioning was done, No action need be taken. Add one more safety valve. Conduct hydraulic test for 1 ½ times the working pressure irrespective of previous test. Coal Mining Legislation 33 / 40 33. When doing a blasting underground the area of blasting, all accessible places including roof and sides within a distance of -----------------should be stone dusted, unless such places are naturally wet. 28 meters 15 meters 12 meters 18 meters Coal Mining Legislation 34 / 40 34. If blasting is done with delay detonators with at least -----------Milli second delay the aggregate charge of 2kg per delay can be used. six seconds & four kilograms two seconds & two kilograms one second & three kilograms half a second & two kilograms Coal Mining Legislation 35 / 40 35. A relieving hole shall be drilled from the misfire hole at a distance of at least ----- meters away throughout the depth of the relieving hole. 35cm 25cm 30cm 15cm Coal Mining Legislation 36 / 40 36. The danger zone is the area falling within a radius of -------------------------------from the place of firing (danger zone) and persons within this area shall take proper shelter.(Changed) 500 meters 400 meters 200 meters 300 meters Coal Mining Legislation 37 / 40 37. Where the wet bulb temperature exceeds ------- degrees centigrade arrangements are to be made to ventilate the same with a current of air moving at a speed of not less than one meter per second 30.5 33.5 30 30.05 Coal Mining Legislation 38 / 40 38. Where the Chief Inspector or the said Inspector fails to inspect the place of accident within___ the area of accident can be disturbed after taking authenticated sketch of the area and photographs. 24 hours 48 hours 72 hours One week Coal Mining Legislation 39 / 40 39. In case some 1st degree mine is classified as second or third degree gassy mine, the Central Government or the Chief Inspector or an Inspector can conditionally permit usage of non-flame proof apparatus that is already under use as per 1st degree gassy standards, for a period, not exceeding-------------- two years one year three years four years Coal Mining Legislation 40 / 40 40. The minimum length of fuse that is to be used during blasting a Shot-hole is. 1.2 meters 1.3 meters 1.4 meters 1.5 meters Coal Mining Legislation Your score is The average score is 49% LinkedIn Facebook Twitter 0% Admin07/08/20240 17 Less than a minute