Learn From Mining Experts

We are providing ONLINE QUIZ for First Class/ Second Class/ Overman/ Foreman/ Blaster/ Gas Testing Examinations

Subject Training

Every part of the syllabus can learn from the basics to advance in our courses

Interesting Quizzes

We are proviing the interesting quizes and latest circulars with refferenceswill be provided

Premium Material

Well advanced short described materials available for the practice to get subject in short time

Our Most Popular Courses

We are providing Mining Engineering Topic wise Materials and Quizes Like all Volumes, Legislation, First Aid, Mining Circulars

Report a question

You cannot submit an empty report. Please add some details.
0%

Longwall and Other Methods of Working

Longwall and Other Methods of Working

1 / 20

1. The power supports widely used in longwall mining in India are?

2 / 20

2. In unit face the face is extracted in one go without any interruption with the face length varies from?

3 / 20

3. The longwall advancing in UK is called as?

4 / 20

4. The length of the longwall face depends on?

5 / 20

5. In longwall advancing the gate roads extend slightly beyond the face and the extended portion of the gate is called?

6 / 20

6. With regular fracturing roof the normal range of periodicity of main falls is ?

7 / 20

7. The C.M. cut coal, load and transfers it on a built in chain conveyor on to a car at the end of each cut and the car?

8 / 20

8. In longwall retreating the size of the panel normally does not exceed in area?

9 / 20

9. The roof fall takes place during caving in the span of ?

10 / 20

10. Which method of longwall is adopted in India?

11 / 20

11. In advanced countries continuous miner is the combination of?

12 / 20

12. The limiting gradient for longwall method is?

13 / 20

13. In longwall method of working the percentage of extraction in depillaring and extraction stage is about ?

14 / 20

14. In longwall advancing the line of extraction is always parallel to?

15 / 20

15. The types of coal extraction in longwall face are?

16 / 20

16. When the size of the goaf formed exceeds the span of ....times the thickness of the seam the roof tends to break into pieces?

17 / 20

17. The overall productivity from longwall workings is generally ....times higher compared to bord and pillar working?

18 / 20

18. In semi unit face the face is divided into 2 units of ....lengths each?

19 / 20

19. The longwall retreating method of UK is called as?

20 / 20

20. The line of extraction in bord and pillar method of depillaring if the seam is gassy thick with strong roof and liable to spontaneous heating?

Your score is

The average score is 39%

0%

Report a question

You cannot submit an empty report. Please add some details.
0%

Underground Metal Mining and Methods

Underground Metal Mining and Methods

1 / 43

1. The method of stoping for massive ore bodies with weak walls and low-grade ore is?

2 / 43

2. The mineral is transported downwards in different sections to the lower level and all the ore is carried to the crusher at the lowest level through?

3 / 43

3. In vertical crater retreat method the spherical charges are used L

4 / 43

4. The method of stoping for narrow and steeply dipping ore with any type of ore and walls is?

5 / 43

5. Alamak raise climber can be used only where inclination of the raise from horizontal is?

6 / 43

6. The length of the back if the dip of the ore is 30 deg?

7 / 43

7. The method of stoping for massive ore bodies of high-grade ore with weak walls, and the ore is mined out in a series of horizontal slices from the top of the orebody is?

8 / 43

8. Level interval is more in the case of?

9 / 43

9. The maximum thickness of the ore body that can be worked with the room and pillar method is?

10 / 43

10. Extraction of the ore minerals mechanically or hydraulically from floating vessels is known as?

11 / 43

11. The method of stoping suitable for thick ore body, strong ore, stable hanging and foot wall, and steeply dipping ore is?

12 / 43

12. Recovery of ore by shrinkage stoping is?

13 / 43

13. The pillar left to support the upper level is called?

14 / 43

14. The method of stoping suitable for thin ore bodies, flat dip, and both ore and walls are strong is?

15 / 43

15. The open raising is limited to?

16 / 43

16. The roadways driven from the shaft from different horizons for access to the mineral deposit are?

17 / 43

17. The process which involves reacting the ore with a liquid solvent that will dissolve the mineral at low or moderate temperature and pressure is called?

18 / 43

18. The interval between levels depending on several points vary from?

19 / 43

19. The dilution in sublevel caving is?

20 / 43

20. Two or three compartment raising is limited to?

21 / 43

21. As the haulage road has to be straight and wide with smooth curves it is in the?

22 / 43

22. Among the methods of open stoping, the method that lends to large scale mechanisation in drilling, blasting, loading, and transporting is?

23 / 43

23. Open stope method is used for ore of?

24 / 43

24. The distance between levels on the plane of the orebody is called?

25 / 43

25. In dry powder extinguisher, which chemical is used?

26 / 43

26. In manual method of raise driving the monthly progress is nearly?

27 / 43

27. The method of stoping where the orebody is a thick vein type ore, and walls are strong and steeply dipping (i.e., footwall steeper than the angle of repose of the broken ore) is?

28 / 43

28. In metal mines a shaft is always sunk in?

29 / 43

29. Overburden heaps should be at least ....m away from the coal face of a quarry?

30 / 43

30. Breast stoping is employed for stoping ore bodies not more than?

31 / 43

31. The daily progress of raise by Alamak climber is?

32 / 43

32. The limiting gradient of the slusher haulage is?

33 / 43

33. should not exceed is?

34 / 43

34. The method of stoping applied for massive deposits of large horizontal extent is?

35 / 43

35. Raising by longhole drilling is limited to?

36 / 43

36. The method of stoping successfully applied to all dips from horizontal to vertical is?

37 / 43

37. The most common method of raising adopted in majority of metal mines is?

38 / 43

38. The method of raising suitable for moderate lengths and inclination of 40 to 60 deg with horizontal with strong strata and wall rock is?

39 / 43

39. The method of stoping for high-grade ore with walls of the ore body and back of the stope so weak that they do not stand without support even for a week is?

40 / 43

40. The method of stoping best suited to low grade deposits of horizontal or mild dip and of thickness up to 5m is?

41 / 43

41. The thickness of the bed in open stoping is?

42 / 43

42. The method of stoping suitable for steeply dipping, reasonably firm ore, mixed graded ore with irregular boundaries, and where ground surface is to be protected from subsidence is?

43 / 43

43. To maintain suitable working space for workings, the muck pile is shrunk in shrinkage stoping by?

Your score is

The average score is 31%

0%

Report a question

You cannot submit an empty report. Please add some details.
0%

Underground Environment and Mine Ventilation

Underground Environment and Mine Ventilation

1 / 36

1. The presence of Nitrous fumes are detected by?

2 / 36

2. The velocity of air flowing in a drift where the velocity pressure is 36 mm is?

3 / 36

3. Geothermic gradient in Indian coal seam is....?

4 / 36

4. Cooling power is a combination of temperature of air; relative humidity and ...?

5 / 36

5. The pitch of the blades of axial flow fans is?

6 / 36

6. The wet bulb temperature in development faces should not exceed?

7 / 36

7. Inclined water gauge is used for the measurement of water gauge for?

8 / 36

8. The water gauge developed and quantity circulated with an axial flow fan depend on?

9 / 36

9. For light manual workers the wet kata is?

10 / 36

10. The noxious and inflammable gases of old workings of a coal mine expand when there is?

11 / 36

11. The minimum quantity of air per person in deg III mine is?

12 / 36

12. Cooling power by conduction convection and radiation is given by using the?

13 / 36

13. With an axial fan, the direction of travel of air current to the mine is changed by?

14 / 36

14. The difference between the atmospheric pressure and the total pressure on the fan drift is called?

15 / 36

15. The mostly used blade type in centrifugal fan is?

16 / 36

16. Upto what depth from the surface the temperature is constant?

17 / 36

17. The value of the kata factor is?

18 / 36

18. The maximum permissible speed of the axial flow fan is?

19 / 36

19. The speed of the centrifugal fan is?

20 / 36

20. If the wet bulb temperature exceeds 30.5 deg c at any place air current should be faster than?

21 / 36

21. In the centrifugal fan reentry of the discharged air is prevented by?

22 / 36

22. The instrument that is used to measure the relative humidity is?

23 / 36

23. Velocity pressure is measured by?

24 / 36

24. In the centrifugal fan smooth flow air and conversion of velocity energy into pressure energy takes place?

25 / 36

25. With a centrifugal fan for a given quantity of air increase of efficiency and reduction in cost of power can be obtained with?

26 / 36

26. Ordinary U-tube manometers are not useful for measurement of gas velocities?

27 / 36

27. The maximum water gauge developed in axial flow fan is?

28 / 36

28. By varying the pitch of the blades the pressure generated by axial flow fan is?

29 / 36

29. The unit for the kata factor is?

30 / 36

30. The water gauge of an axial flow fan can be increased by?

31 / 36

31. The manometric efficiency of axial flow fan is?

32 / 36

32. Whirling hygrometer is rotated with a speed of?

33 / 36

33. The inclined water gauge can read upto?

34 / 36

34. The overall efficiency of axial flow fan is?

35 / 36

35. For comfortable working conditions the reasonable velocity of air at the working face is?

36 / 36

36. Static pressure is measured by?

Your score is

The average score is 56%

0%

Be in Demand with Our Professional Training

Admin- Vinod hanumandla

You can Build relevent skills for what you are preparing for First calss/ Second Class/ Overman/ Foreman/ Shotfirer/ Gas Testing Examinations

Our Site is Great Platform for learning things and preparing well knowledge experts and also First class certificate holders from the field

Our Professionals are experts in the field and knowledge on the specific subject can gives you excellent guide to your brite career

Future Career for
Mining Students

What Our Students Have to Say

Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Kelvin Black
From Dallas, USA
Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Zasha Swan
From Australia
Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Frank Jones
From Japan
Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Jack Brownn
From London, UK
Back to top button