Volume-2

Mine Fires and Spontaneous Heating

Report a question

You cannot submit an empty report. Please add some details.
0%

Mine Fires and Spontaneous Heating

Mine Fires and Spontaneous Heating

1 / 33

1. Do not allow the burning of fires within .....m from an incline opening?

2 / 33

2. The blanketing layer which is used to detect cracks in stoppings should be ....m thick?

3 / 33

3. The sample pipe should pass through the temporary stopping and should extend ....m beyond it towards the fire side?

4 / 33

4. During the process of sealing fire area below ground the atmosphere near the stowing should be tested frequently for ?

5 / 33

5. In spontaneous heating the temperature of the initial stage is up to.....deg?

6 / 33

6. The coal stock should not exceed at least?

7 / 33

7. The coals are more prone to spontaneous heating if the coal having at least?

8 / 33

8. The coal is not liable to spontaneous heating if the coal has oxygen content?

9 / 33

9. If a quarry is abandoned the coal and the OB dump should be separated by digging a trench ....m wide?

10 / 33

10. The coal is more prone to spontaneous heating if the moisture content is?

11 / 33

11. The best extinguisher for gaseous fires is?

12 / 33

12. Thermal conductivity of shale is ....of sandstone?

13 / 33

13. With CO/O2 deficiency ratio 2 % indicates?

14 / 33

14. Spontaneous heating is more likely to occur in coals of?

15 / 33

15. The height of the coal stock should not exceed at least?

16 / 33

16. Air samples behind the stopping should be drawn during the periods of?

17 / 33

17. The best extinguisher for fires involved live electrical equipment is?

18 / 33

18. The isolation stopping should be explosion proof if the minimum CH4 % behind the stopping is ...?

19 / 33

19. The best extinguisher for fires due to oil is?

20 / 33

20. In Gypsum stoppings for every cu.m of stopping volume about ...te of gypsum is required?

21 / 33

21. Ammonia should not be used in U/g mines as it forms an explosive mixture with air if present ..... by volume?

22 / 33

22. In CO2 extinguisher the pressure of the CO2 in liquid form is?

23 / 33

23. The incubation period in SCCL mines is?

24 / 33

24. Halon is also called as?

25 / 33

25. Spontaneous heating is more likely to occur in coals of?

26 / 33

26. The minimum thickness of the explosion proof isolation stopping is?

27 / 33

27. Isolation stopping in deg I and II gassy coal mine should have minimum thickness of?

28 / 33

28. Temporary stoppings are constructed ?

29 / 33

29. The ignition temperature of the bituminous coal is?

30 / 33

30. Stoppings should always be kept whitewashed on the surface and at the roof floor and sides for .....m outbye for every detection of cracks?

31 / 33

31. Isolation stoppings are ?

32 / 33

32. Isolation stopping should have minimum depth of locking in shale is?

33 / 33

33. Air samples from behind the stoppings should be collected between?

Your score is

The average score is 60%

0%

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button